Select equipment
AIR LEAK POROSITY LINE 2
Air leak (porosity) inspection line for CDF housings, performing leak tests for balance piston, piston, and hub sections after phase positioning.
AIR LEAK POROSITY-LINE 1
Air leak inspection line with 10-second cycle time for FORD 10R80 and 10R60 CDF housings (without sleeve).
AIR LEAK SLEEVE LINE 2
Air leak inspection line with a 10-second cycle time for CDF housings with sleeves (10R80, 10R90, etc.).
AIR LEAK WITH SLEEVE LINE 1
Air leak inspection line with 10-second cycle time for 10R60 and 10R80 CDF housings (with sleeve).
BALANCE MACHINE 2 LINE 1
Fully automatic balance correction machine for clutch housings, performing automatic unbalance measurement, drill-cutting correction, pass/fail judgment, and discharge/sorting from conveyor loading to unloading.
BALANCE MACHINE 3 LINE 2
BALANCE MACHINE 4 LINE 2
BALANCE MACHINE LINE 1
Semi-automatic clutch housing balancer that performs part loading via conveyor, automatic unbalance measurement, automatic correction (drill cutting), and part ejection.
BALL PRESS LINE 1
Ball press-fit machine with 10-second cycle time for 10R80 CDF housing.
BALL PRESS LINE 2
Ball press-fit equipment for 10R80/10R90 CDF housings with a 10-second cycle time.
BUSHING PRESS LINE 1
Bushing press machine for 10R80 CDF housing.
BUSHING PRESS LINE 2
Bushing press machine for CDF parts. Automatically press-fits bushings into the C-side and DF-side with load and displacement measurement.
CC-101
Chip conveyor for OP40-1 LINE1.
CC-233
Chip conveyor for OP40-2 LINE1.
CC-261
Chip conveyor for OP40-1 LINE2.
CC-262
Chip conveyor for OP40-2 LINE2.
CMM-04
Coordinate measuring machine for CDF Balance LINE1.
CMM-05
Coordinate measuring machine for CDF Balance LINE2.
CV-28
Conveyor preceding WASHER-26.
CV-63
Conveyor preceding BALANCE MACHINE LINE 1.
CV-64
Conveyor preceding BALANCE MACHINE3 LINE 2.
CV-67
Conveyor preceding BALANCE MACHINE2 LINE 1.
CV-68
Conveyor preceding BALANCE MACHINE4 LINE 2.
CV-69
CV-72
DEBUR LINE 1
Deburring machine for workpieces after drilling.
DEBUR LINE 2
LATHE-111
CNC machine tool equipped with FANUC Series 0i-TF NC unit, gantry loader, chip conveyor, washing/measuring unit, and dust collector.
LATHE-143
CNC lathe system equipped with a gantry loader for automatic workpiece transfer and a washing/measuring unit.
LATHE-160
CNC lathe by Takisawa Machine Tool equipped with FANUC Series 0i-TF. Configured as an automated machining line with a gantry loader, washing/measuring unit, and chip conveyor.
LATHE-49
Offline lathe for OP40-3 LINE1.
LATHE-50
Offline lathe for OP40-3 LINE2.
LATHE-76
CNC lathe system equipped with a gantry loader, chip conveyor, washing/measuring unit, and dust collector.
LOADER-1
Loader for carrying workpieces into WASHER-21 after protector insertion.
LOADER-2
Loader for unloading cleaned workpieces from WASHER-21.
OIL HOLE QA 1 LINE 1
Automated inspection equipment for workpiece transport, camera inspection, and laser inspection before sleeve press-fitting.
OIL HOLE QA 1 LINE 2
Inspection line for CDF oil holes using multiple cameras and 3D laser sensors for image dimension and visual inspection.
OIL HOLE QA 2 LINE 1
Inspection line using cameras to check oil holes in 10R80 CDF parts after ball press-fitting.
OIL HOLE QA 2 LINE 2
Oil hole inspection machine for CDF after sleeve press-fitting, including camera image inspection and groove inspection.
PT-01
Equipment for inserting protectors into CDF housings.
PT-02
Conveyor equipment for transferring workpieces from the insert machine to the removal machine, and for returning protectors.
PT-03
Equipment for removing protectors from CDF housings and transferring them to the return conveyor.
PT-04
Equipment for inserting protectors into CDF housings and verifying the presence and insertion positions of three O-rings.
PT-05
PT-06
SLEEVE PRESS LINE 1
Sleeve press line including phasing, oil coating, servo press insertion, air blow, and NG part ejection processes.
SLEEVE PRESS LINE 2
Automated assembly equipment that press-fits sleeves into workpieces, performs oil coating, height/depth inspection, and NG workpiece discharge.
SLEEVE PRESS QA LINE 1
Equipment for quality inspection (measurement) of workpieces after sleeve press-fitting. Belongs to the same manual and line as the sleeve press machine (AD-14M12).
TRIM PRESS-11
Machine that punches out and separates sleeves or bushings from defective workpieces that have had sleeves, bushings, or balls press-fitted into them.
WASH-19
Offline washer for cleaning sleeves before loading into the sleeve stocker.
WASH-21
Main line consisting of an infeed loader, washer/dryer unit, and outfeed loader.
WASH-21 MC
Dedicated equipment for suctioning and collecting oil mist generated inside the washer.
WASH-26
Loader equipment for post-machining workpiece washing, loading, and unloading for FORD 10R80 CDF-HSG.
WASH-28
Washer line that loads workpieces, performs washing, air blow, and hot air drying, then unloads them.
WASH-29
Automated washer line performing workpiece washing, air blow, and hot air drying at each station (2ST to 4ST).
WASH-30
Equipment for shower washing, draining, and hot air drying of metal parts (clutch components) with a 20-second cycle time.
WASHER AIR BLOW 1
Roots blower supplying compressed air to the air blow process of WASH-28.
WASHER AIR BLOW 2
WASHER AIR BLOW 3
Roots blower supplying compressed air to the air blow process of WASH-29.
WASHER AIR BLOW 4
AI Maintenance