| WO # | Equipment | Status | Symptom | Reported At | Assignee | Resume |
|---|---|---|---|---|---|---|
| 2110dc8d | WASH-30 | Open | Cycle time is too slow / Timeover warning | 7/20/2026 | dsheets@e-fcca.com | |
| 788fbeda | DEBUR LINE 1 | Resolved | Mechanical damage and wear on the work carry clips, latches, gripper cylinder, and mounting brackets, causing transfer failures | 7/16/2026 | zglover@e-fcca.com | |
| daa465a8 | AIR LEAK SLEEVE LINE 2 | Resolved | Homing Failure on the General / Unclassified module | 7/16/2026 | zglover@e-fcca.com | |
| 1b4e467f | AIR LEAK POROSITY-LINE 1 | Open | Part sticking / jam during Oil Groove 1 leak test | 7/13/2026 | Jinshuo Li | |
| 52db2666 | BALL PRESS LINE 2 | Open | Seal Damage / Wear on the Leak Inspection Unit | 7/13/2026 | dsheets@e-fcca.com | |
| c694f04a | OIL HOLE QA 2 LINE 2 | Resolved | Camera Inspection 2ST is falsely rejecting parts for D-Tool mark (no physical defect on parts) | 7/10/2026 | zglover@e-fcca.com | |
| f7b088de | SLEEVE PRESS LINE 2 | Resolved | Press index stopped mid-position. Production removed parts and attempted to home machine before maintenance arrival; machine is now unrecoverable. | 7/10/2026 | zglover@e-fcca.com | |
| e60cd67e | AIR LEAK POROSITY-LINE 1 | Resolved | Air leak at Station 1 leading to parts failing inspection | 7/10/2026 | zglover@e-fcca.com | |
| cbcb302c | PT-04 | Resolved | Loader Axis Fault on Entrance Conveyor and unable to change HMI/GOT screen from teach page after 24VDC control power cycle | 7/10/2026 | zglover@e-fcca.com | |
| 2f239be6 | AIR LEAK POROSITY-LINE 1 | Open | Jig / Clamp Malfunction during Oil Groove 1 Leak Test | 7/10/2026 | Jinshuo Li | |
| ac792493 | AIR LEAK WITH SLEEVE LINE 1 | Resolved | Station 1 position abnormal alarms | 7/9/2026 | efennig@e-fcca.com | |
| fe64d5c9 | DEBUR LINE 1 | Resolved | AMP alarm for the F PUSHER at Station 10 (F Groove) due to mechanical binding | 7/7/2026 | zglover@e-fcca.com | |
| f02d2c8a | DEBUR LINE 1 | Resolved | Machine times over for Shuttle #1 (Work Carry Cycle Timeover) | 7/7/2026 | zglover@e-fcca.com | |
| a28658d8 | WASH-28 | Resolved | Mechanical binding and jam on the Main Shaft / Index due to workpiece interference | 7/7/2026 | zglover@e-fcca.com | |
| e0a0e383 | DEBUR LINE 1 | Resolved | Alignment issue on the F Groove | 7/7/2026 | zglover@e-fcca.com | |
| 639a7bc4 | BALL PRESS LINE 2 | Resolved | Ball not inserted into hole 1F, causing part failure | 7/7/2026 | zglover@e-fcca.com | |
| a74bca2a | WASH-26 | Resolved | Table fix positioning alarm at Station 3 (part rotation station) | 7/2/2026 | zglover@e-fcca.com | |
| b507ad07 | WASH-26 | Resolved | Out Loader gripper hit the part and tripped the collision sensor, causing a collision fault with no servo alarm | 7/2/2026 | zglover@e-fcca.com | |
| e5a76ced | AIR LEAK POROSITY-LINE 1 | Resolved | Air leaking from loose line on Station 1 | 7/1/2026 | dsheets@e-fcca.com | |
| fdb44e03 | BALL PRESS LINE 2 | Resolved | 3R is not putting a ball in due to blury camera/sensor image | 7/1/2026 | dsheets@e-fcca.com |
1-20/62 (1/4)